Don Lasota is coming on april 10th

[Rodeheavers]

We are hosting Don & Rob Lasota on april 10th, ;he is gong to be tuning all day for us again. We will have diablo mafias, sct products on stock. The cost for site members will be 350$ for a complete custom tune from THE MAN!!!! call me if you want in on it.

[Rodeheavers]

so far for mustnag dyno tuning we have:
-MBH
-94svtcobra
-cwh19
-Rodney (customer)
-John4cam (possible)
-

[2001GTTT]

Theres a 95% chance my car will be nowhere near ready by then, but if it is, I will be there for a tune.

[95riosnake]

Tim just make sure you get him back down here mid to late May ;)

[Rodeheavers]

He will more than likely be coming once a month this summer.

[2001GTTT]

Tim just make sure you get him back down here mid to late May ;)


yes. if thats the case ill be good to go.

[Mach1Mush]

I think ill be out just to hang out, It was a good time watchin the cars and listening to what Don an Rob had to say last time.

[MBH]

Can't wait!!!

[scott5]

hmmm... wonder if the drag radial car should come out.. When you need to know by tim?

[Rodeheavers]

hmmm... wonder if the drag radial car should come out.. When you need to know by tim?

you can let me know up until the day of...

[scott5]

you can let me know up until the day of...

ok.. i will see if it will be willing to come out of hiding yet.

[Rodeheavers]

updated list.

-05 supercharged gt
-99 KB 2v GT
-04 supercharged gt
-MBH 03 cobra
-Cwh19 sn95 supercharged
-f-250 procharged
-07 roush 427r (not the one we are building now)

[94svtcobra]

when do you think your next one will be Tim?

[cwh19]

Tim any idea what the order is going to be? Or is it that list?

[Rodeheavers]

prolly in May, we had him come once a month last year and it should be the same if not more this year.

[Rodeheavers]

Tim any idea what the order is going to be? Or is it that list?

not really, its going to be an all day event, but I am scheduling people how they want scheduled, i think as of right now we are going to jump on your car first since its going to be here anyways.

[cwh19]

not really, its going to be an all day event, but I am scheduling people how they want scheduled, i think as of right now we are going to jump on your car first since its going to be here anyways.

Oh ok cool. I'm not worried about it or anything i was just wondering. By the way, the tranny gasket is in the mail. They said it should be there tomorrow.

[08Snake]

I'll definitely be coming out in may for him then

[John4cam]

prolly in May, we had him come once a month last year and it should be the same if not more this year.


I may be able to swing may Tim. Thanks for the call today.

[Tom]

Is there anymore spots open for this tuning day? I would like to get a less conservative tune.

[Rodeheavers]

Is there anymore spots open for this tuning day? I would like to get a less conservative tune.
haha, you got the bug for sure man!!!! congrats on the 12 second ET!!!!!

we have spots in may for sure, but there is a slight chance you can get it done if somebody else has a problem or cant make it, you are more than welcome to come and join in the fun and maybe get in on the action. its 350$ per tune for site members and after talking to Don, he believes that he can pull some power out of the Brenspeed tune...

[Tom]

haha, you got the bug for sure man!!!! congrats on the 12 second ET!!!!!

we have spots in may for sure, but there is a slight chance you can get it done if somebody else has a problem or cant make it, you are more than welcome to come and join in the fun and maybe get in on the action. its 350$ per tune for site members and after talking to Don, he believes that he can pull some power out of the Brenspeed tune...

Cool, sign me up for the may one. Also, for the week before the tune see if you can make room to do a universal fmic and pulley. Thanks.

[talontsi92]

after talking to Don, he believes that he can pull some power out of the Brenspeed tune...

I hope so, it is very rich, like off the wideband o2 gauge rich. just leaning it out should make some power, let alone adding a little timing.

[2010 SS]

Hey Tim, how much would a tune run someone? I'm going to recommend getting in on this sometime to a guy I'm working with. Has a pretty nice GT 2000ish. Has Lt headers,exhaust,n cold air intake.

[Rodeheavers]

for site members its 350$ for non site members its 400$, but if he only has light i could tune it myself at the shop for prolly a little less.

[2010 SS]

Cool thanks. He told me it was tuned but it pops like crazy in neutral when he revs on it, somethings not right. I'll try to send him to you.

[MBH]

can't wait for saturday!! lots of supercharged mustangs!!

[Molek]

What time does the tuning begin?

[Rodeheavers]

930

[94svtcobra]

ill be there

[2001GTTT]

Timmy, what day in may is the next tuning day?

[Rodeheavers]

Timmy, what day in may is the next tuning day?

i am not sure yet, i will let you know as thing progress. I already have 3 cars on that list.

[94svtcobra]

numero uno

[95riosnake]

numero uno


Dos

[2001GTTT]

i am not sure yet, i will let you know as thing progress. I already have 3 cars on that list.

Add me to it please : )

[MBH]

Everything for tomorrow is a go. I didn't get the new spark plugs in today like I wanted to (had a funeral to attend this afternoon) but changed the oil and the injectors. Still haven't waxed my car since I took it to tim's shop which seems like forever ago, so try not to judge the car. It's been slumming it for the past 6 months and not as clean as I'd like it to be. at all. Once my semester ends, brian and I install the coilovers on my cc I'll be back to my OCD self hahaha.

Also, I have absolutely no idea what my car is going to make power wise (probably about the same as before I'd imagine) but the mustang dyno numbers are going to be a heart breaker lol. I'm guessing it'll put down 460rwhp?

[Rodeheavers]

Add me to it please : )

no problem man.

[somethingclever]

Well what's up? Where's the official "numbers" thread? Shall I make one?

[Rodeheavers]

OK, these are all "if i remember correclty"
colton-94 gt, 285hp blowing through the convertor
dan-kb 99 gt, 288hp had some kind of problem??
steve-07 f-150 procharged 370hp
Lowell- 05 gt paxton, 460hp
rodney-02 gt vortech 477hp
bo- 03 cobra 460hp
carl-05 roushcharged 360hp
all in all it was a good day, other than the kb car having some kinda problem and coltons car blowing throught the convertor. COltons car is going to make much more power on the dyno once he gets a better convertor.

[somethingclever]

THanks for sharing Tim...


That's a pretty stout GT....477rwhp on a loaded dyno....is that still a 2v? Is that race fuel?

Any pics of that F150...370rwhp FTW!....

[Rodeheavers]

THanks for sharing Tim...


That's a pretty stout GT....477rwhp on a loaded dyno....is that still a 2v? Is that race fuel?

Any pics of that F150...370rwhp FTW!....

its a 5.0 stroker on race gas. it ran out of injector at 5500

[Rodeheavers]

here r some pics

[1Badbird]

I had to work today but came past around noon on my way to the jy. There was a nice crowd there! On my way home there was still a nice group of people there but I had to get ready to go to my neice's 2nd B-day party so I wasn't able to stop in and say hi. Hopefully next time.

[RGL]

Thanks Tim great day yesterday with a lotta good cars. I'll be gettin some 60's soon and see if we can get a little better num.'s. Thanks to Don also he does great work.

[MBH]

HUGE props to everyone that made this possible, all Brian and I were talking about on the way home was how awesome you guys are. I know I've seen and been involved in some other dyno days where if there was a problem (no matter how big or how small) it was not handled in the same manner. Not even close.

You guys are a class act and really work well together. I know that I couldn't be happier - well, maybe if that fluke solenoid/bypass and FRPS issue didn't come up, but the fact that you guys troubleshot, checked all my BAP wiring, and solved the problem literally within a few moments was ridiculous in my honest opinion.

Thanks to you guys, I finally get to enjoy my car again!

[John4cam]

HUGE props to everyone that made this possible, all Brian and I were talking about on the way home was how awesome you guys are. I know I've seen and been involved in some other dyno days where if there was a problem (no matter how big or how small) it was not handled in the same manner. Not even close.

You guys are a class act and really work well together. I know that I couldn't be happier - well, maybe if that fluke solenoid/bypass and FRPS issue didn't come up, but the fact that you guys troubleshot, checked all my BAP wiring, and solved the problem literally within a few moments was ridiculous in my honest opinion.

Thanks to you guys, I finally get to enjoy my car again!

Nice to hear Bo. You went through hell for a while with it I'm sure..

[MBH]

YouTube- 2003 SVT Cobra with full exhaust on the dyno

The video is still processing and looks fuzzy, but will be 720p hopefully by early tomorrow for you guys.

I'm calling it a night, I'll try to get to Colton's space ship video on tuesday (honestly, I don't think the mic picked it all up because your car sounded hellacious on the dyno. Hopefully it didn't recognize the bypass as wind noise and remove that frequency) possibly will have some pictures for you guys on tuesday as well

[95riosnake]

YouTube- 2003 SVT Cobra with full exhaust on the dyno (http://www.youtube.com/watch?v=pP9mwwVKdEY)

The video is still processing and looks fuzzy, but will be 720p hopefully by early tomorrow for you guys.

I'm calling it a night, I'll try to get to Colton's space ship video on tuesday (honestly, I don't think the mic picked it all up because your car sounded hellacious on the dyno. Hopefully it didn't recognize the bypass as wind noise and remove that frequency) possibly will have some pictures for you guys on tuesday as well

yay for stingers!!! :clap2:

[Rodeheavers]

THis is whats its all about here guys... I got this message this mourning from happy customer..

First Name : steve
Last Name : christy
Address Street 1 :
Address Street 2 :
City : pgh
Zip Code :
State : PA
Daytime Phone : 412-897-2642
Evening Phone :
Email : schristy@swindelldressler.com
Comments : Tim, I was down to your shop on saturday 4-10-2010 we put my truck on the dyno with the Lasota's tuning. My truck is awesome thanks Tim, Chris & lil mike for your help, lending tool and what ever i needed. It was a fun dyno day at Rodeheaver's...... 5.4 3valve 365 h.p.@4800rpm 430ft.tq..... @6 psi 2005 f-150 screw cab larait sleeper. Thanks Tim