Rodeheavers
01-20-2010, 11:38 AM
Here at Rodeheaver's we offer just about any product for your high performance application, we can almost always meet or beat others prices, call us today for more info... We also offer many different services which will be priced below, please keep in mind that these prices may change slightly for different applications and for severe or custom cases..
Shop Labor rate, $50/hour
Dyno rates are located on our "dyno" page on our website.
Supercharger installs, 650$(with intercooler)
Gear swap, 250$ labor for drum brake rears,
275$ labor for disc brake rears,
FMS gears 200$+ - 20$(depending on ratio)
Long tube header install 96-2010, $325+ headers (done in one day or less, hang out with us and watch while we do it!!)
Mid pipe and cat back install, 60$ each if you buy it from us!!!
Pa state inspections, 25$ (pass or fail)
Clutch install 87-95 250$, 96-09 350$, with long tubes 450$
Exhaust, mufflers, Tips
-Dual exhaust for 1996+ 2wd/4wd trucks with Flowmaster/magnaflow $450
-All tips are stainless steel and you can choose the size!!
Rollbar & Roll cages
6 POINT ROLL Bar $620
8 POINT ROLLBAR $850
10 POINT ROLL Cage $1140
12 POINT ROLL CAGE $1500
WINDOW NET & MOUNT $150 (at the time of the cage)
NOTE:ABOVE PRICES ARE FOR CARS WITHOUT INTERIORS, $50.00 PER HOUR TO REMOVE AND RE-INSTALL INTERIOR. MUST HAVE DRIVERS SEAT WITH CAR.
Suspension & frame Labor Parts
SUBFRAME CONNECTORS $250 installed (custom)
($60.00 TORQUE BOX REINFORCEMENT)
LADDER BARS SUSPENSION $2000 installed
LADDER BAR SUB FRAME $3200 installed
FUEL CELL AND MOUNT $150 plus cell
BATTERY MOUNTS, EACH $75.38
ON/OFF SWITCH MOUNT $117.00 (standard mount)
GENERAL SHOP RATE $50.00 PER HOUR
Keep in mind, every application is different. Please call for more info, as these are general prices for "bare bones" installs... And each ladder bar / 4-link kit contains chrome moly rod ends, your choice of panhard, wishbone, or diagonal link bars. All ladder bars are double adjustable and either kit includes 3 way adjustable coil overs.
Shop Labor rate, $50/hour
Dyno rates are located on our "dyno" page on our website.
Supercharger installs, 650$(with intercooler)
Gear swap, 250$ labor for drum brake rears,
275$ labor for disc brake rears,
FMS gears 200$+ - 20$(depending on ratio)
Long tube header install 96-2010, $325+ headers (done in one day or less, hang out with us and watch while we do it!!)
Mid pipe and cat back install, 60$ each if you buy it from us!!!
Pa state inspections, 25$ (pass or fail)
Clutch install 87-95 250$, 96-09 350$, with long tubes 450$
Exhaust, mufflers, Tips
-Dual exhaust for 1996+ 2wd/4wd trucks with Flowmaster/magnaflow $450
-All tips are stainless steel and you can choose the size!!
Rollbar & Roll cages
6 POINT ROLL Bar $620
8 POINT ROLLBAR $850
10 POINT ROLL Cage $1140
12 POINT ROLL CAGE $1500
WINDOW NET & MOUNT $150 (at the time of the cage)
NOTE:ABOVE PRICES ARE FOR CARS WITHOUT INTERIORS, $50.00 PER HOUR TO REMOVE AND RE-INSTALL INTERIOR. MUST HAVE DRIVERS SEAT WITH CAR.
Suspension & frame Labor Parts
SUBFRAME CONNECTORS $250 installed (custom)
($60.00 TORQUE BOX REINFORCEMENT)
LADDER BARS SUSPENSION $2000 installed
LADDER BAR SUB FRAME $3200 installed
FUEL CELL AND MOUNT $150 plus cell
BATTERY MOUNTS, EACH $75.38
ON/OFF SWITCH MOUNT $117.00 (standard mount)
GENERAL SHOP RATE $50.00 PER HOUR
Keep in mind, every application is different. Please call for more info, as these are general prices for "bare bones" installs... And each ladder bar / 4-link kit contains chrome moly rod ends, your choice of panhard, wishbone, or diagonal link bars. All ladder bars are double adjustable and either kit includes 3 way adjustable coil overs.