May 22nd tuning day

[Rodeheavers]

Hey guys, we have Don & ROb coming again on the 22nd of May. Please let me kown if you want in on this,. The only differene is the price has gone up from 350$ to 400$ per complete tune. and 450$ for non site members. I will supply us lunch and drinks all day.

[95riosnake]

Well, you already know I'm in lol

[94svtcobra]

yea buddy

[94svtcobra]

we could nickname this 347 day at rodehevers hot rod

[Tom]

Awesome! Is it cool to drop my car off on the afternoon of the 16th then?

[Rodeheavers]

Awesome! Is it cool to drop my car off on the afternoon of the 16th then?

that sould work fine, so we can get all your new parts installed.:hat:

[scott5]

i think you said this already, but i forgot.. But what all software does he use to tune?

[Rodeheavers]

i think you said this already, but i forgot.. But what all software does he use to tune?

Don tunes with SCT, I know he can tune with others but you must talk to him personally. visit www.lasotaracing.com

[Don@LRT]

Might as well say I tune with SCT 100% of the time - I'm a dealer for Diablosport, but never use it and I would never use it on a tuning day.
Don

[Rodeheavers]

Might as well say I tune with SCT 100% of the time - I'm a dealer for Diablosport, but never use it and I would never use it on a tuning day.
Don

thanks for the reply Don.

[Rodeheavers]

We have 6 cars so far for this day. Its been crazy busy here at the shop!!!

[cwh19]

What all are They

[95riosnake]

Is anyone going to be going from the Pittsburgh area that wouldn't mind giving me a ride? My car is planned to be finished and tuned that day so I need a way to the shop. My girlfriend followed me down to drop the car off to Tim but she said she is not down for a whole day of watching dyno tuning, haha.

[08Snake]

I'm going up that day. I'm right up from Rita s ice in millvaleIs anyone going to be going from the Pittsburgh area that wouldn't mind giving me a ride? My car is planned to be finished and tuned that day so I need a way to the shop. My girlfriend followed me down to drop the car off to Tim but she said she is not down for a whole day of watching dyno tuning, haha.

[95riosnake]

I'm going up that day. I'm right up from Rita s ice in millvale

Awesome! If you don't mind, it would be a great help. I'll pm you closer to the 22nd to iron it out, I live right in Aspinwall, so it would be on the way to the turnpike for you :thumb:

[94svtcobra]

this is the list that I know of

95riosnake's 95 cobra with a 347
94svtcobra's 94 cobra with a 347
preppy's roush 427R with a built motor
not sure what the other three are

[Rodeheavers]

-Tom
-a guy named Jimmy
-a guy named Rodney

[Tom]

this is the list that I know of

95riosnake's 95 cobra with a 347
94svtcobra's 94 cobra with a 347
preppy's roush 427R with a built motor
not sure what the other three are

Is that the silver roush with the black hood?


I'm getting dyno tuned too. Tim is adding a fmic, 3.4 pulley, bbk lt headers and catted x, 1 piece alu. driveshaft, spec stage2+ clutch, forge bpv and lcas. I'm hoping to get 400whp, we'll see!

I was at 343whp with just the supercharger (3.6 pulley).

[police4.6]

i should be there as well to spectate

[94svtcobra]

Is that the silver roush with the black hood?


I'm getting dyno


yes

[95riosnake]

Today's the big day!:whoo:

[MBH]

I can't wait to hear results from today, Clark texted me the good word that Mike's car was done late last night!! best of luck gentlemen!!

[Shaffer]

I made it up to the shop for a little bit today. Had planned on tuning my Saleen, but my SF3 decided it didn't want to work with us today. Was very impressed with the cars, and can't wait to see what numbers the Roush put down.

[Tom]

I had a DNF. Ordering some new parts for the next tuning session.

[scott5]

numbers?

[Rodeheavers]

Roush, 560 (Major belt slip and was only making 15lbs!!!
Rodney, (blown 5.0 stroker) 509
Dan 342
Mike 290ish(had a small iisue with the dyno and the car will be retested this friday)
Dan(the other one with the blue 2v KB car) 377
Tom(needs a bigger bypass valve)
Jimmy(i think he needs a new wiring harness)?!!?!

[95riosnake]

Dan 342

don't forget 408 rwtq! This thing is a monster compared to the h/c/i 302!

[Shaffer]

Dan, saw that car today. Very nice. It just SHINES, and the engine bay is immaculate.

[94svtcobra]

I cant wait to see what mine puts down this friday, and Dan, Im glad to hear you got some very healthy numbers out of yours, I know you were pretty beside yourself at first

[95riosnake]

I cant wait to see what mine puts down this friday, and Dan, Im glad to hear you got some very healthy numbers out of yours, I know you were pretty beside yourself at first

Yea I was pretty bummed initially when I only made 304/348, it just didn't make any sense to only gain 17rwtq by going to a brand new 347 lol.

[wishIhada5.0]

what a day lol Thanks again to Tim, Don, Rob, Chris, and everyone else for all their help....Im extremely happy with how it all turned out...lots of nice cars down there! Im glad I got to meet some new people too :) Hey Mike...could you do me a favor? I forgot my hoodie down at the shop, could you grab it next time you go down?

[Rodeheavers]

YouTube- new edge GT with a kenne bell supercharger
YouTube- new edge mustang GT with a procharger
YouTube- 95 cobra getting tuned
YouTube- 07 roush getting tuned 560RWHP on a mustang dyno

[95riosnake]

Thanks for postin em up Tim!

If you get a chance before Carlisle, can you cut me a new decal for under the "RODEHEAVER'S" on my back window that says "Speed and Dyno Shop" in red? Make it like 2.5" tall and about 20" wide or so

[wishIhada5.0]

wooo hooo I got posted first :P Im amazed that mine looks half decent in that pic for how lously it looked in person lol Thanks for postin em up! Everyone's ride looked and sounded good!!!