Heads, Cams ?

[Mach1Mush]

I'm looking into my next mod for my 04 mach. At first i was leaning toward a Supercharger but now Im giveing aftermarket heads and cams a thought.... Any advice on which heads or cams for a 4v motor ?

[cwh19]

I'm looking into my next mod for my 04 mach. At first i was leaning toward a Supercharger but now Im giveing aftermarket heads and cams a thought.... Any advice on which heads or cams for a 4v motor ?

Which heads come stock on a Mach?

[Mach1Mush]

Which heads come stock on a Mach?

I was under the impression they are the same heads as an 03-04 cobra, not sure tho. Can anyone back me up on this?

[Mach1Mush]

I just read an article that the mach's heads are the improved tumble port C heads from the 99-01 cobra. They are the same heads as the 03-04 cobra

[scott5]

First off.. The heads you have are basically the best head for your car unless you want to spend HUGE money on a set of FR500 heads... Cams would be a nice upgrade, but arent really needed.. Comp cams are what i usually see.. But you would be better off finding a used SC and putting on your car.. Cams alone for your car are around 1000 bucks without the other things you need or would want to change while you do a cam swap.. And if you are paying someone to put them in you have to add that cost too... IMO S/C would be the best way to go.

[Rodeheavers]

I agree with Scott, he just beat me to the punch. a blower is the way to go, blower cams would be great to do when the blower is getting done as well.

[scott5]

I agree with Scott, he just beat me to the punch. a blower is the way to go, blower cams would be great to do when the blower is getting done as well.

yup.. Cause if you do cams now and you want to do blower down the road more than likely you will have to get new cams, cause what i have seen and read aftermarket big NA cams are not very blower friendly for the 4v, but i could be wrong..

You could do blower now and then add stage 4 cams once you want that cam sound and more performance, just as Tim said