exhaust headers...

[police4.6]

anyone know of any headers that would fit on a 97 crown vic.. i figure if it fits to a mustang it would fit on the engine side of my car but i dont know if it will get around the steering shaft.. anyone got any ideas?

[Rodeheavers]

I think that 4.6 t-bird headers are gonna be your best bet, I would have to check but i think kooks makes a set. On a side note, headers will help that baby breath ALOT better.

[police4.6]

I think that 4.6 t-bird headers are gonna be your best bet, I would have to check but i think kooks makes a set. On a side note, headers will help that baby breath ALOT better.

i know thats what i am going for i looked at the ones i got on there today closer and i realized they are smaller than two inches. its kinda depressing.. what kinda power gain do you think i could get from it? would it be worth the money and the effort that is going to be needed to change em?

[Rodeheavers]

i know thats what i am going for i looked at the ones i got on there today closer and i realized they are smaller than two inches. its kinda depressing.. what kinda power gain do you think i could get from it? would it be worth the money and the effort that is going to be needed to change em?

a good set of longtube headers can be worth 10-20 rwhp..

[police4.6]

a good set of longtube headers can be worth 10-20 rwhp..

okay cause right now i am probs at about 190 HP or in that general area i would like to get it up to at least 215.. my buddy has a set of heads off of the old engine that was in this car i think i am going to bring them to you for some mild port work.. you think the heads the exhaust and a nice intake would get me around that power level?

[Rodeheavers]

okay cause right now i am probs at about 190 HP or in that general area i would like to get it up to at least 215.. my buddy has a set of heads off of the old engine that was in this car i think i am going to bring them to you for some mild port work.. you think the heads the exhaust and a nice intake would get me around that power level?

if its a non-pi motor i have no idea, i havent really done anyting with them except put pi stuff on them. But if its a PI headed car then you really dont need to port them, they are pretty big from the factory and will support that ho with no problem..

[police4.6]

if its a non-pi motor i have no idea, i havent really done anyting with them except put pi stuff on them. But if its a PI headed car then you really dont need to port them, they are pretty big from the factory and will support that ho with no problem..

they arent the PI heads... would it be a better idea just to get the PI heads? this is where i am not sure.. i have read guys go back and forth on this but i guess its the port job that they would get done on the non-PI heads?

[Rodeheavers]

they arent the PI heads... would it be a better idea just to get the PI heads? this is where i am not sure.. i have read guys go back and forth on this but i guess its the port job that they would get done on the non-PI heads?

doing PI heads would be like getting a stage 5 port job on your non-pi heads.. I say YES get the PI swap and long tubes..:tongue1:

[police4.6]

ha now the question is how much is a set of PI heads?

[cwh19]

ha now the question is how much is a set of PI heads?

Look on corral. You can get them at a pretty good price.

[Rodeheavers]

ha now the question is how much is a set of PI heads?

3-600$ used.. you have to look around..

[Rodeheavers]

check this out..http://www.musclemustangfastfords.com/features/mmfp_0805_2000_ford_crown_victoria/index.html

http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1946514

[cwh19]

check this out..http://www.musclemustangfastfords.com/features/mmfp_0805_2000_ford_crown_victoria/index.html

http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1946514

Thats probably one of the coolest things I've ever seen.

[Rodeheavers]

Thats probably one of the coolest things I've ever seen.


if yo ulike that check out this..

http://rds.yahoo.com/_ylt=A0LEVIbC12FLmTUAKA4PxQt.;_ylu=X3oDMTExdGs4NWh xBHNlYwNzcgRwb3MDMwRjb2xvA3JlNAR2dGlkAwRsA1dTMQ--/SIG=14c878vkq/EXP=1264789826/**http%3A//www.racingjunk.com/category/18/Complete_Race_Cars/post/1739628/1986-MUSTANG-PROJECT-FRIGHTNING-STREET-STRIP-.html

[cwh19]

Thats pretty sick. Whenever I get out of school I want to put a mod motor into a car its not supposed to be. Like a civic or something. :fear:

That vic looks awesome though. I love massive cars that can fly.

[police4.6]

ha tim if you want you can sponsor my car and do it to mine.. and instead of me paying you i will trailer the $$$$$ around every weekend to car shows.. :eyebrows:


but that crown vic i have seen in person... it was at richmond raceway when i went to a nascar race with my pops a few years back... lets just say. COOLEST crown vic ever.

[talontsi92]

That is definitely not your grandpa's Crown Vic. That bish has got to FLY!