15" wheel

[cwh19]

Does a 15'' wheel clear factory 94 GT brakes? If not can I just through some spacers on?

[94svtcobra]

rears? yes

[scott5]

rears yes
Fronts depends on what you want to do.. Some have fit them, but you have to grind the brakes like crazy or you can do what i did and buy spacers which alot of guys do and run those.. BUT get the spacers with the studs built into them.. Like the ones i sold to caleb.. DO NOT get the spacers that are just that, spacers

[scott5]

http://i111.photobucket.com/albums/n137/scottydc52000/Black%20Widow%2095/Picture044.jpg
rear
http://i111.photobucket.com/albums/n137/scottydc52000/Black%20Widow%2095/Picture049.jpg
front
http://i111.photobucket.com/albums/n137/scottydc52000/Black%20Widow%2095/Picture045.jpg
side
http://i111.photobucket.com/albums/n137/scottydc52000/Black%20Widow%2095/Picture051.jpg

[scott5]

dont mind the purge soleniod in the front pics hehehehe

[cwh19]

rears yes
Fronts depends on what you want to do.. Some have fit them, but you have to grind the brakes like crazy or you can do what i did and buy spacers which alot of guys do and run those.. BUT get the spacers with the studs built into them.. Like the ones i sold to caleb.. DO NOT get the spacers that are just that, spacers

I have 9'' wide front wheels with 275s on my white car and since I deleted the power steering its a $$$$$ to turn. I mean its possible but its a pain. I think im going to buy some summit pro stars, paint them gloss black and put those on. I drive the car once a week at the most anyway so i think that'll be good. I'll be nice to have them for the track too.

Unless I can find some like 17x7 wheels I think thats the route I'm going to go.

[94svtcobra]

do slicks n skinnies

[cwh19]

do slicks n skinnies

Thats what i think I'm going to do. 15x4 in the front 15x10 in the back.

[police4.6]

rears yes
Fronts depends on what you want to do.. Some have fit them, but you have to grind the brakes like crazy or you can do what i did and buy spacers which alot of guys do and run those.. BUT get the spacers with the studs built into them.. Like the ones i sold to caleb.. DO NOT get the spacers that are just that, spacers

scott i bought those off of you for the rear and had to put just the regular spacers on front.. man i had to have tim take it to a guy to get new studs that were 3 inch so the spacers would clear pressed into my friggin spindles... its a pain in the $$$ colt dont do what i did.

[cwh19]

scott i bought those off of you for the rear and had to put just the regular spacers on front.. man i had to have tim take it to a guy to get new studs that were 3 inch so the spacers would clear pressed into my friggin spindles... its a pain in the $$$ colt dont do what i did.

Yea I'll probably get actual spacers. I think I'm going to take the wheels off of my white car and put them on my green car and sell the bullits. Then buy big and littles. Although I have been looking at some 17x7 wheels and there are some nice ones out there.

[94svtcobra]

bigs n lils

[scott5]

I have 9'' wide front wheels with 275s on my white car and since I deleted the power steering its a $$$$$ to turn. I mean its possible but its a pain. I think im going to buy some summit pro stars, paint them gloss black and put those on. I drive the car once a week at the most anyway so i think that'll be good. I'll be nice to have them for the track too.

Unless I can find some like 17x7 wheels I think thats the route I'm going to go.

Yea i could of told you that.. with the skinnys up front tho you can turn it with ease.

Thats what i think I'm going to do. 15x4 in the front 15x10 in the back.

if your not going to race it at the track i would save some money and just get the 15x8s. rims will be cheaper and the tires will be ALOT cheaper esp since dr only last a summer depending on how much you drive.

scott i bought those off of you for the rear and had to put just the regular spacers on front.. man i had to have tim take it to a guy to get new studs that were 3 inch so the spacers would clear pressed into my friggin spindles... its a pain in the $$$ colt dont do what i did.

Yea i used them for the front.. The pics that i posted are those exact spacers on the front and i had no issues what so ever with them.. rears dont need spacers with the sn95s